Bath Hardware Installations

As with most parts of any remodeling project,than necessary for the same reason. Of course, in
planning is critical. Of course you still may get a betterthe end, you may once again change your mind and
"sense of the space" after the demolition is completehave to use sinkers in the drywall anyway. If not,
and change things anyway. I still recommend beingthe effort will be well worth it.
ahead of the game.The ultimate solution would be to install plywood on
My first construction job was on a hospital. One ofyour walls under the drywall. Then you have
my tasks was to install wood bracing in the walls forcomplete freedom with your desired locations.
grab bars in the bathrooms. There had to beThough, this will shrink your room slightly, and cost a
something solid to attach to for these applications. Inlittle more. The plywood is also a good option when
the typical residential bathroom, you probably justbuilding a handicap shower. We then use pressure
don't want your kids pulling the towel bar off thetreated plywood under our tile board and mastic
wall. This little detail never escaped my memoryadhesive along with the screws for an added
banks.moisture barrier.
When you are through with the rough in work onPlanning your bathroom remodeling with these tips in
your bath project, and before you hang the drywall,mind will keep your towel and grab bars safe and
place your towel bars, grab bars, paper holders, etc.secure. If you are hiring a remodeling contractor for
Document these locations (believe me you may notyour bathroom request that the extra support is
remember). Then install framing in the walls for a solidinstalled. Taking these extra measures assures your
connection for your hardware. We usually use 2 xhardware stays in place for many years of use and
10's for a wider location option. We also put moreenjoyment.